Double Glazing Door Locks
Many homeowners opt for double glazed doors and windows to increase insulation and energy efficiency as well as sound reduction. But, they also serve as an effective deterrent to burglars.
Verify that your double-glazed windows are fitted with anti jemmy hinges to increase their security. These specialised hardware components make it extremely difficult to open window sashes.
Multi-point locking
Multipoint door locks are among the most secure security devices you can install in your home or workplace. They are nearly impossible to pick or break, and are a great option to add to any security system. They can also improve your energy efficiency by reducing drafts as well as improving the seal around the door frame.
Multi-point locking systems comprise of a deadbolt and live bolt (latch) paired with hook bolts below and above the latch, and flush bolts that lock into the head and sill of the door frame. They usually extend across the entire width of the door, or even more. In commercial settings, they are referred to as "full-width" systems, because they protect the entire opening.
The majority of uPVC doors have multi-point locking, but certain timber doors are offered with this level of security. This type of lock offers a higher level of security than standard locks. It is often specified as part of the Secured by Design initiative, which has been endorsed by the police.
If a uPVC door that has a multi-point lock has been closed the handle on the outside turns the latch bolt. The inside handle is locked by turning the thumbturn lock on the inside with the door handle raised or by using the key. Always use a key to lock your door. Utilizing a handle to lock your door could damage the latch or deadbolt.
If your uPVC lock isn't functioning properly, it could mean that it's not aligned with the frame of the door. You can test this by placing a spirit level on top of the doors and observing for gaps at the miter joints.
It's worth asking your double glazing specialist if there is an opening and how to close it. They'll be able to repair the lock on your behalf or install a new one. They'll be able to determine whether the issue is caused by damage to the frame or the lock unit itself. In these cases, the technician will be able to repair or replace the multipoint lock to restore it's functionality.
Espagnolette locks
Espagnolette locks are now a standard locking mechanism for double-glazed uPVC windows. The shape of the flat strip that rotates when you turn the handle is a good way to recognize them. They work in conjunction with the secure multi-point locks that are positioned around the frame to lock and unlock your windows. If you are looking to upgrade your uPVC windows, espagnolette handles are an ideal option for new builds or renovations. They come in a wide variety of styles, including contemporary and period. They also offer many bar sizes, backset options, mushroom cam heights and a selection of profiles that can be used for every application.
While they are a popular choice the espagnolette locks have been criticized as providing inadequate security for French doors. A single locking point located in the middle of the door can be easily accessed. It is also fairly easy for thieves to gain access to your French doors by forcing the handle to move to the left or right. These types of doors are usually used as the principal entry point to your home, and must be secured to reduce the chance of intrusion by a stranger.
The espagnolette lock does not function as a bolt, but a single-piece mechanism which can be fitted externally on the edges of French doors or internally to an existing frame. The mechanism is operated by a handle and consists of a rod that has hooks at the head and at the sill that fit into sockets in the window frame. When the handle of the window is turned on it moves the rod upwards and downwards. The hooks then secure into their respective receivers.
They are a great solution for those who wish to increase the security of French doors without compromising on the appearance of the door. These handles can be used in various styles and are able to be master-keyed for added peace of mind.
Like cockspur handles, espagnolette handle are available in both crank and inline models depending on the orientation of your windows. Inline versions move in the same direction as the original. Cranked versions are available in both right-handed and left-handed options.
Laminated glass
Laminated glass is often used in windows because it is extremely difficult to break. It is also safer than normal glass because it is a single piece of safety glass, rather than breaking into sharp, loose shards. This makes it perfect for homes as well as commercial buildings.
Lamination is the process of combining two pieces of flat glass with an interlayer of plastic. The entire piece is heated before being pressured to make it stronger enough to be used as an entrance or window. replace upvc window lock resulting laminated glass is up to 5 times stronger and 100 times more rigid than glass that is tempered. It also can be able to withstand more severe impacts and resist weathering.
This type of glass is perfect for buildings that need to perform well, like enhanced security (impact-resistant glass) and UV protection or noise reduction. Laminated glass can be paired with high-performance coatings to improve the thermal insulation as well as solar control. It's available in a variety of options to fit your project and budget.
Unlike tempered glass, laminated glass can be cut after production and still be safe to use. It is less likely to break if it's cut from the sides of the glass, rather than the edge. This makes it a good option for glass that doesn't open and close like cellar windows.
It is also utilized in high-rise buildings in urban areas because it can reduce the amount of noise that flows from the street to the interior of the. The Saflex PVB interlayer in the laminated glass helps to suffocate some of the sun's damaging UV rays, thus preventing discoloration of furnishings and fabrics.
Although laminated glass is typically more expensive than glass that has been tempered, it comes with numerous advantages that could save you money over the long term. It's also more robust and resistant to abrasions and scratches and can be customized to your specifications. It's also less prone to heat damage, which makes it a great option for coastal areas and high-rise buildings. Certain building codes also require that exterior doors and some interior windows are made from laminated glasses.
Friction hinges
Friction hinges support and keep doors as well as flaps and panels. They also impede the movement of other hinges and stop an unintentional closing and opening. They are available in various sizes and shapes, and are able to have a variety of torques. These forces determine the length of time that hinges remain open or shut.
Aluminum is a fantastic material for friction hinges because of its strength, durability, resistance to corrosion and high strength-to-weight ratio. It is also lightweight and easy to handle. It is also able to be made into a variety of finishes and is easy to set up and repair. Brass is another material widely that is used in friction hinges. Brass is an alloy of zinc and copper and is naturally resistant to corrosion. It is stronger and more durable than stainless steel, however it is more expensive.
The hinges made of friction that are used in uPVC double glazing door systems can be customized to meet the specific needs of the particular application. These modifications can include the amount damping, lubricant viscosity and the degree of tolerance between components. They may also include the environmental conditions in which the hinge is used. These variables can affect the dynamic torque of the hinge and it is essential to monitor this metric for critical applications.
There are many different types of friction hinges, such as one-way and detent. One-way friction hinges have constant torque in one direction, while detent friction hinges have no torque in the opposite direction. Other variations include curl, disc and pipe friction. Each type of friction hinge has its own set of characteristics that make it more or less efficient in particular applications.
Friction hinges are also referred to as hinges with a free-stop since they permit the lid or door to remain at an angle even after the force has been eliminated. This protects against injuries by preventing accidental closing. This type hinge is ideal for use in medical, tough or hazardous locations. The hinges can be configured to provide different levels of free play and can be designed to work in a range of angles.